Reactive Power Factor Controller For Capacitor

power factor controller 1.LCD display 2. Store 24 hours data 3.RS232 and RS485 connect 4.Manual input-resect capacitance

High Voltage Reactive Power Factor Controller

  

Description:

JKW18G high voltage reactive power compensation controller is a new generation distribution test control device as integrating data acquisition, power network parameter analysis, reactive power compensation communication as a unit, which is suitable for controlling the high voltage power network system parameter monitors and reactive compensation, can offer the perfect and accurate data basis for power network safety running, reasonable distributing load improving electric energy quality etc. 

Working conditions:

Altitude: not exceed 2500mAmbient temperature: -25- 50 degreeAir humidity should not exceed 50% at 40 degree and not exceed 90% at 20 degreeNo corrosive gas, conductive dust and flammable and explosive medium around the ambient.No fierce vibration at installation site.

Technical data:

Power voltage: AC220V

Power frequency: 45-65Hz

Signal frequency: 45-65Hz

Signal current: AC0-5A

Power frequency: 45-65Hz

Signal voltage: AC50-260V

Power consumption of machine: <10VA

Voltage: +/- 0.5%

Current: +/- 0.5%

Power factor: +/- 1.0%

Active power: +/- 1.0%

Reactive power: +/- 1.0%

Active coulomb: +/- 1.0%

Reactive coulomb: +/- 1.0%

Electric network frequency: +/- 0.01Hz

System clock: +/- 4ppm, yearly error less than 2min 

Technical data:

Power voltage: AC220V

Power frequency: 45-65Hz

Signal frequency: 45-65Hz

Signal current: AC0-5A

Power frequency: 45-65Hz

Signal voltage: AC50-260V

Power consumption of machine: <10VA

Voltage: +/- 0.5%

Current: +/- 0.5%

Power factor: +/- 1.0%

Active power: +/- 1.0%

Reactive power: +/- 1.0%

Active coulomb: +/- 1.0%

Reactive coulomb: +/- 1.0%

Electric network frequency: +/- 0.01Hz

System clock: +/- 4ppm, yearly error less than 2min

Specification:

Model	Tapping size	Power voltage	Signal frequency	Control circuit	Display
JKW18G	139X139	AC220V	50/60 Hz	1-6	LCD

Installation mode

Flush type and guide rail type: 

Test Report:

Reactive Power Factor Controller For Capacitor